CGR Landscapes & Groundworks logoCGR Landscapes& Groundworks
Home › Guides › Driveways & planning

Do I need planning permission for a driveway in Essex?

CGR Landscapes & GroundworksUpdated 21 September 20267 min read

Short answer: for most driveways in Essex, no — as long as the surface is permeable or the water drains somewhere sensible. But there are four catches that trip people up every year, and one of them (the dropped kerb) isn't planning at all. Here's how it actually works in Chelmsford, Braintree, Witham and the villages.

The 5 m² front-garden rule

Since 2008, paving the front of a house has been covered by a specific permitted development rule. You don't need planning permission if any one of these is true:

  • the new hard surface is 5 m² or less in total; or
  • the surface is permeable — water drains through it into the ground; or
  • the surface is impermeable, but rainwater is directed to a lawn, border or soakaway within your own boundary, not onto the pavement or into the road.

Fail all three — say, a plain tarmac or concrete drive over 5 m² that sheds water onto the footpath — and you need a householder planning application. From April 2026 that costs £548 in England, takes around eight weeks, and may well be refused. Nobody sensible builds a driveway that way any more, which is why the rule rarely bites if the job is designed properly.

The rule applies to the front of the house (technically, any area between the house and a highway). A patio in the back garden doesn't count.

What counts as "permeable"?

SurfacePermeable?Notes
Gravel on a stabilising gridYesCheapest route to compliance. Needs a permeable sub-base too, not just gravel on top of hardcore.
Permeable block pavingYesBlocks with wider, gravel-filled joints on an open-graded sub-base. Looks like standard block paving.
Resin-boundYesStone mixed with resin and trowelled — water drains through. Only counts if the base underneath is permeable too.
Resin-bondedNoStone scattered onto a resin-coated surface. Looks similar, but it's sealed — water runs off.
Standard block pavingNoFine on the 5 m² rule if it falls to a border or a soakaway, which is how we usually design it.
Tarmac / concrete / imprinted concreteNoNeeds to drain to a lawn, border or soakaway within your plot, or it needs planning.
Watch the sub-baseA permeable surface on an impermeable base isn't permeable. If a quote for resin or permeable block doesn't mention an open-graded (Type 3) sub-base, ask.

Dropped kerbs: not planning, but you still need permission

This is the one that catches most people. If your new driveway crosses a pavement or verge, you need a vehicle crossing (dropped kerb). It doesn't matter whether you own the land — the pavement is highway, and driving over a full-height kerb is an offence and will wreck it anyway.

In Essex — Chelmsford, Braintree, Witham, everywhere except the unitary areas of Southend and Thurrock — this is handled by Essex Highways, not the district council, and it's a two-stage process:

  1. You apply for consent. The initial application fee is currently £189.55 (non-refundable). It covers a site visit and a check for gas, water and electric services under the footpath. You'll need a simple scaled plan showing the crossing position, the driveway surface, and any trees, lamp posts or manhole covers nearby.
  2. Your contractor applies to do the work. Once consent is granted, the crossing has to be built by a contractor approved by Essex Highways under a road opening notice (£150). We're set up for this and build it into the driveway job.

Applications can be refused. Common reasons around here: the crossing would be too close to a junction, bend or pedestrian crossing; there's a tree, lamp column or utility cabinet in the way; or the hardstanding isn't deep enough for a car to sit fully off the road. It's worth having us look at the frontage before you pay the fee.

Classified roads are different. If your house fronts an A or B road — the B1018 through Witham, the A131, the A120 through Coggeshall, for example — creating a new access needs planning permission as well as the Highways consent.

Conservation areas, listed buildings and Article 4

Permitted development rights are reduced in conservation areas and removed almost entirely for listed buildings. Mid-Essex has a lot of both:

  • Chelmsford: Writtle, Great Baddow, Broomfield, Boreham and the older village centres.
  • Braintree district: Bocking, Coggeshall, Kelvedon, Earls Colne, Castle Hedingham, and Chipping Hill and Newland Street in Witham.
  • Silver End has an Article 4 direction — permitted development rights for walls, fences and gates facing the road have been removed, so even replacing a front boundary needs an application.

In a conservation area the driveway surface itself usually still falls under the 5 m² rule, but demolishing a front wall over 1 m high to make the access needs consent, and the council will have views on materials. For a listed building, assume everything needs consent and talk to the council's conservation officer first — it's free.

New-build estates: check your covenants

If you're on an estate built in the last thirty years or so, check your deeds. Many carry restrictive covenants that require the developer's or management company's consent for changes to the frontage — including paving over the front garden — regardless of what planning says. It varies from estate to estate and we can't tell you from the outside whether yours has one. It's a private agreement rather than planning law, but ignoring it can cause problems when you sell, so dig out the deeds or ask your conveyancer before you commit.

Trees

If there's a tree with a Tree Preservation Order on or near the frontage — common in Danbury, Writtle and the older parts of Witham — excavating within its root protection area needs consent from the council, and a competent landscaper won't dig there without it. Trees in conservation areas are protected too: you must give the council six weeks' notice before doing anything to them.

What we do

On every driveway quote we tell you which of the above applies, design the surface and drainage so you stay inside the 5 m² rule, and manage the Essex Highways vehicle crossing application from start to finish. If planning permission is genuinely needed, we'll tell you before you spend anything.

Weighing up surfaces? See block paving vs resin-bound and what drives the cost of a driveway in Essex.

Frequently asked questions

Do I need planning permission to replace my existing driveway?

Not if you're replacing like for like, or moving to a permeable surface. If you're enlarging it beyond 5 m² with an impermeable surface that drains onto the road, yes.

How long does an Essex Highways dropped kerb application take?

Allow several weeks from application to decision, and then time to schedule the approved contractor. We recommend applying as soon as you've decided to go ahead, so the crossing is approved before the driveway work starts.

Can I just drive over the kerb without dropping it?

No. Driving over a full-height kerb damages the footpath, the council can require you to pay for repairs, and it's an offence under the Highways Act. It also invalidates any claim if a car is damaged.

Is resin-bound always permeable?

The surface is, but the driveway only counts as permeable if the base underneath is too. Resin laid on an old sealed tarmac or concrete drive is not a permeable driveway — the water has nowhere to go.

Who do I contact about planning in Witham or Braintree?

Braintree District Council for planning and conservation, and Essex Highways for the dropped kerb. In Chelmsford it's Chelmsford City Council for planning and again Essex Highways for the crossing.

Not sure what your driveway needs?

Send us a photo of the frontage and your postcode. We'll tell you whether you need a dropped kerb, whether planning applies, and what it'd cost to do properly. Free, no obligation.

Ready to transform your outdoor space?

Free site visits across Essex, London & Devon — no obligation, no pressure.

Call 07770 480291
WhatsApp us
Call nowWhatsApp