It's the first thing most people ask us, and the honest answer is that two patios of exactly the same size can cost very different amounts. This guide explains what drives the price in mid-Essex specifically, so you can compare quotes properly and spot the ones that are cheap for a reason.
Why there's no simple per-metre price
Anyone who quotes you a patio price over the phone without seeing the garden is guessing. The slabs are often less than half the cost of the job — the rest is the ground underneath, getting materials in, and dealing with water. Here's what actually moves the number.
1. Size — but not in the way you'd think
Bigger patios cost more in total but usually less per square metre, because setting up, skips, and getting the digger in cost roughly the same whether you're laying 15 m² or 40 m². A small patio in a tight Chelmsford terrace garden can work out surprisingly expensive per metre for that reason.
2. The paving material
| Material | What to know |
|---|---|
| Indian sandstone | The most popular choice around Witham and Braintree. Natural variation in colour, good value, but needs sealing to stay clean and can go green in shaded gardens. |
| Porcelain | Higher material cost and needs a primer and full mortar bed, so more labour — but it doesn't stain, doesn't fade and is very easy to keep clean. Increasingly the first choice for new builds around Chelmsford. |
| Concrete slabs | Cheapest to buy, quickest to lay. Fine for a utility area; less so for a main entertaining space. |
| Block paving | Good for curves and steps, and blocks can be lifted and relaid if you need to get to a drain later. |
3. What's under it — the bit that matters in Essex
Most of mid-Essex sits on heavy clay — London Clay to the south and boulder clay through Braintree, Witham and up towards Gosfield. Clay shrinks in a dry summer and swells in a wet winter, and a patio laid on a thin bed of sand will follow it: rocking slabs, open joints and puddles within a couple of years.
Doing it properly on clay means excavating deeper, laying a weed membrane, and putting down 100–150 mm of compacted MOT Type 1 before the slabs go on a full mortar bed. That's more digging, more muck away and more material than a "quick" job — and it's the single biggest reason for the gap between a cheap quote and a proper one.
4. Access
Can a mini-digger and dumper get to the back garden? On many older properties in Witham and Hatfield Peverel the side gate is too narrow, so everything — spoil out, sub-base in — goes by wheelbarrow, which adds days of labour. Terraced houses in Chelmsford and Braintree where materials have to come through the house are the most labour-intensive of all.
5. What's there now
Breaking out an old concrete patio or a failed one that's been laid on hardcore costs more than starting from lawn. Skip and muck-away charges in Essex have risen sharply, and clay is heavy, so removal is a real line on the quote rather than an afterthought.
6. Falls, drainage and the damp-proof course
A patio needs to fall away from the house — roughly 1 in 80 — so rain runs off rather than sitting against your brickwork. If the garden slopes the wrong way, you may need a channel drain along the house and somewhere for the water to go, which on clay usually means a properly sized soakaway rather than a hole with some gravel in it.
The finished surface also has to sit at least 150 mm below your damp-proof course. It's a Building Regulations requirement and one of the most common things we see done wrong on patios we're asked to fix.
7. Steps, edging and the finishing details
Steps, retaining edges, sleeper walls, lighting cables and a proper resin or epoxy joint rather than brushed-in sand all add cost — but they're also what makes the difference between a patio and a nice patio.
What a proper quote should include
- Excavation depth and how spoil is being removed
- Sub-base type and depth, and whether a membrane is included
- Bedding method — full mortar bed, not spot bedding ("dot and dab")
- The exact paving product, thickness and jointing compound
- Drainage: falls, channel drains, soakaway if needed
- Whether sealing is included
- A start date, how long it'll take, and payment stages
We give every customer an itemised written quote covering all of the above after a free site visit. If someone else's quote is a single figure on a text message, that's your answer as to why it's cheaper.
Do I need planning permission for a patio in Essex?
For a rear garden patio at a normal level, no. The two exceptions to check are listed buildings and conservation areas — there are several around Terling, Gosfield and the older parts of Witham — and paving at the front of the house, where any new hard surface over 5 m² must be permeable or drain to a lawn or border unless you get planning permission.
Frequently asked questions
How long does a patio take to lay?
A typical 20–30 m² patio takes three to five working days including excavation and sub-base. Porcelain, complex shapes, steps or poor access add time. We'll give you a realistic timeframe with the quote.
Is porcelain worth the extra cost over sandstone?
If you want a patio that stays looking new with a hose-down rather than annual pressure washing and sealing, usually yes. If budget is the priority and the garden gets plenty of sun, good-quality sandstone is still excellent value.
Can you lay a new patio over an old one?
Sometimes, if the existing base is sound and the levels allow it against the damp-proof course. Usually it's better to remove it — laying over a failed base just means the new patio fails the same way.
Why is my quote so different from my neighbour's?
Access, ground conditions and what's being removed vary house to house even on the same street. Ask both contractors what depth of sub-base they're installing — that's usually where the difference is.
Want a real number for your garden?
We'll visit, measure up and give you an itemised written quote — free, and with no pressure to go ahead. We work across Essex, London and Devon.
